Panorama building

Parent Previous Next

Panorama building



Build panoramas can take a long time - from several tens of minutes to several hours. Start by selecting options: Roll, Perspective, Width.


Rotation


If the camera while shooting standing at an angle relative to the vector of the train, when you get a panorama assembly jagged edge of the area. Use this setting to compensate for this deficiency.


Perspective


If the camera during shooting is not looking perpendicular to the vector of the train, but at a certain angle, because of the difference in size of the left and right sides used the central part you will get a burr between the edges of loose-boxes. To eliminate them, use the Perspective parameter.

Width


Depending on the velocity of the composition and the width of the video frame rate used by the central portion can be varied. In the general case thin band - the better. However, this is possible only if the relative motion is slow or if the frame rate is very high. Therefore, if you use multiple frames to get a grip on the horizontal image, go back using the Back button and increase the value of width.

It should also be noted that the velocity of the composition can be varied over time. It is also necessary to consider and to frequently change the value Width. The easiest way to determine the correct width - is watching the wheels of cars or trains. They must be perfectly round. If not, adjust the Width parameter.


To speed up the assembly pan, you can use macros. Instead of ten times to press the Next button, you can click once F3. Or Shift + F3, then it will be save 100 taps. Or Ctrl + F3. Then the program will be 1,000 times itself click on the Next button.

Created with the Personal Edition of HelpNDoc: Create iPhone web-based documentation